Finally, the option to get exactly what you want on a premium NIB-x Nickel Boron custom dust cover. These AR15 ejection port covers are first given a silver finish with a coating of NIB-x Nickel Boron then engraved
with an industrial laser that oxides the coating to create a permanent, rust
proof, black and high image on your rifle. Don't settle for the inferior
covers that look dull and tarnished, get the real deal here. Perfect for
showing off your new rifle, or rekindling some love for an older one, or
helping you differentiate different uppers in your collection. These covers are sure to start conversations every
time you pull your AR out. Practical applications include keeping your calibers
straight so you load the right ammo, or designating your AR from others at the
range, especially for LEO/Military guys where every rifle looks the same. Throw up some propaganda sure to raise morale
on your next trip to the range or out back for some fun!
- Show off your new caliber
-Law Enforcement Badges
-Anything you can imagine.
Buy just the cover if you are replacing a blank cover you already have, or we
can also include the pin, spring and clamp needed if you are building a new
upper, or buy a complete upper parts kit with forward assist pin and spring as
We want to make the process as easy as possible and make sure your cover turns
out just like you want. We have very
high standards and your dust cover final product quality is determined by the
graphic quality you send us. Here are a
few guidelines and recommendations.
-Color vs. Grayscale vs. Black and White - the engraving
process only engraves in 2 bit black and white.
For the cleanest and best looking engravings, we recommend using black
and white images only. Black and white
images have NO GRAY, SHADING, SHADOW, FADING, or other effects. If you are still unsure, the image below is an
example of pure black and white. We can
use grayscale images, but the detail you see on your computer screen generally
doesn't fully translate to the engraving.
-Resolution - If your image is grainy and pixelated, your
engraving will probably look worse. The
more detail in your image, the better the image we prefer in order to get a
good clean capture to transfer to our engraving machine. Also keep in mind the size of the dust cover,
if we try to take a highly detailed image and shrink it down to 1/2" tall,
we will lose a lot of the detail. A
simple test if you are able is to take your image and shrink it down to
1/2" tall and print it out on your printer, if you can make it out, it
will probably be ok.
-Pictures - Please do not send us pictures of items with graphics
on them and ask us to use the graphic on the item. We will need the actual graphic and not a picture
of the graphic on something else.
We want your dust cover engraving to be a piece of art and
to enhance your AR, and a little bit of preparation on your part can help
ensure the process goes smoothly and the end result is something you can be
proud to display on your rifle. If you
have any questions please do not hesitate to contact us. If you are emailing us additional graphics please indicate the file names of the additional graphics in the correct blanks above.