Finally, the option to get exactly what you want on a custom Magpul PMAG is
available at a reasonable price. These AICS 7.62X51 PMAGs are engraved
with an industrial laser that reacts with the polymer to create a bright image on your magazine. Don't settle for the inferior
PMAGs that look dull and tarnished, get the real deal here. Perfect for
showing off your new rifle, rekindling some love for an older one, or
helping you differentiate different calibers in your collection. These PMAGs are sure to start conversations every
time you pull your AR out. Practical applications include keeping your calibers
straight so you load the right ammo, or designating your AR from others at the
range, especially for LEO/Military guys where every rifle looks the same. Throw up some propaganda sure to raise morale
on your next trip to the range or out back for some fun!
-Caliber Designations
- Show off your new caliber
-Patriotic designs
-Tributes
-Law Enforcement Badges
-Military logos/ranks
-Anything you can imagine.
Options
We keep the most popular PMAG variants in stock as we are able, select from 10, 20, 30, and windowed models. Keep in mind that the 10rd and windowed version will have significantly less area to engrave.
Graphic Requirements
We want to make the process as easy as possible and make sure your PMAG turns
out just like you want. We have very
high standards and your dust cover final product quality is determined by the
graphic quality you send us. Here are a
few guidelines and recommendations.
-Color vs. Grayscale vs. Black and White - the engraving
process only engraves in 2 bit black and white.
For the cleanest and best looking engravings, we recommend using black
and white images only. Black and white
images have NO GRAY, SHADING, SHADOW, FADING, or other effects. If you are still unsure, the image below is an
example of pure black and white. We can
use grayscale images, but the detail you see on your computer screen generally
doesn't fully translate to the engraving.
-Resolution - If your image is grainy and pixilated, your
engraving will probably look worse. The
more detail in your image, the better the image we prefer in order to get a
good clean capture to transfer to our engraving machine. Also keep in mind the size of the dust cover,
if we try to take a highly detailed image and shrink it down to 1/2" tall,
we will lose a lot of the detail. A
simple test if you are able is to take your image and shrink it down to
1/2" tall and print it out on your printer, if you can make it out, it
will probably be ok.
-Pictures - Please do not send us pictures of items with graphics
on them and ask us to use the graphic on the item. We will need the actual graphic and not a picture
of the graphic on something else.
We want your PMAG engraving to be a piece of art and
to enhance your AR, and a little bit of preparation on your part can help
ensure the process goes smoothly and the end result is something you can be
proud to display on your rifle. If you
have any questions please do not hesitate to contact us.
LEGAL: We will not ship where prohibited by law.
Fitment Details:
Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others*
-Accepts a cartridge overall length of up to 2.86"-
-Next-generation impact and crush resistant polymer construction
-Self-lubricating follower for increased reliability
-Long life stainless steel spring
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling and is easy to disassemble for maintenance
* PLEASE NOTE: Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required.
Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.
The PMAG 7.62 AC magazine is optimized for the .308 Winchester based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock, and in most platforms performs exceptionally well in similar, but non-.308 based cartridges, such as 6.5 Creedmoor. While other rifle platforms, such as the Ruger American Rifle®, can be upgraded for use with AICS-spec bottom metal and magazines, the internal design features may present some feeding and reliability concerns when used with the standard PMAG 10 7.62 AC magazine in non-.308 based calibers.
As such, Magpul does not recommend the PMAG 7.62 AC for calibers other than .308-based cartridges in the Ruger American Rifle® in the Hunter American stock, and results may vary in other actions with 3-lug bolts. For optimal feeding and reliability with the Hunter American in cartridges like 6.5 Creedmoor, it is recommended to utilize only the updated Magpul PMAG 5 7.62 AC, easily identified with its brown lock plate and follower for complete Magpul reliability.
My Cart 
MY Account