Looking to complete your build with professional results? Look no further. Give your lower receiver the protection it needs and was designed for by properly anodizing to mil-spec standards. The receivers are professionally prepped and anodized to Mil-Spec Type III Class 2 (dyed) that you expect on any factory lower receiver. Anodizing not only protects the receiver from corrosion, but also creates a very hard exterior layer that will protect the lower from abuse. A solid layer of anodizing is the best base for most aftermarket coatings such as Cerakote and Duracoat. Turn around times are quite fast with this service, usually around a week.
*YOU MUST BE 21 TO ORDER ANY COMPLETED STRIPPED RECEIVER. IF UNDER 21 AND SENDING IN A COMPLETED LOWER FOR WORK, IT MUST BE SENT IN WHILE CONFIGURED AS A RIFLE WITH BUFFER TUBE ATTACHED. ADDITIONAL SHIPPING CHARGES WILL APPLY.