Mixing calibers is how rifles get hurt. Put a 7.62x51mm marking right on the AR-10 dust cover and stop guessing which upper is which. Bold caliber marking, inside and outside. One look and you know exactly what this upper eats.
AR-10 fitment, read this first: The AR-10 is not a Mil-Spec platform. Proprietary uppers that use the generic AR10 name may take a different dust cover size than the covers we use. If you're unsure, check with your upper manufacturer. Detailed sizing specs: AR-15 and AR-10 dust cover fitment and dimensions.
Because the dust cover is the first thing you see when you grab the upper. If you run more than one caliber on the same platform, a marked cover is cheap insurance against loading the wrong ammo.
You don't pry it. The cover is spring loaded and pops open on its own the moment the bolt carrier moves: rack the charging handle or fire a round. Close it by hand when you're done.
You need the hinge pin and spring. Our AR-10 dust cover installation parts kit uses a 4.2" rod. Not all AR-10 platforms use the same length rod, so check your upper first. Install steps: installation page.
Select a row below to filter reviews.
5.0