Finally, the option to get exactly what you want on a custom dust cover is available at a reasonable price. These AR10 308 caliber ejection port covers are engraved with an industrial laser that oxides the coating to create a permanent, rust proof, bright and shiny image on your rifle. Don't settle for the inferior covers that look dull and tarnished, get the real deal here. Perfect for showing off your new rifle, or rekindling some love for an older one. These covers are sure to start conversations at the range every time you pull your AR out. Practical applications include keeping your calibers straight so you load the right ammo, or designating your AR from others at the range, especially for LEO/Military guys where every rifle looks the same.
Engraving Suggestions
-Caliber Designations - Show off your new caliber
-Patriotic designs
-Tributes
-Law Enforcement Badges
-Military logos/ranks
-Anything you can imagine.
Options
Buy just the cover if you are replacing a blank cover you already have, or we can also include the pin, spring and clamp needed if you are building a new upper, or buy a complete upper parts kit with forward assist pin and spring as well.
Fonts
We generally engrave in a standard block font, but can use most Windows or free fonts available online. Should you want a custom font, please indicate in the engraving locations above what font you want using brackets following the text you want engraved.
For Example: AREA A: COME & TAKE IT [Stencil Font]
Text Sizing
We size text to look the best
and be consistent on the inside/outside.
If you are wanting sizing to be different, to exactly match previous
orders, or have any other properties, please notate that in the blanks or order
comments.
Multiple Graphics
For most orders, we already have most common graphics on file like the US Flag, Punisher, Spartan Helmet, etc.... You can just specify the image you want in the blanks without uploading. If we do not have it we may email you to ask for a copy or clarification. If you have multiple custom images, please reply to your order confirmation with the additional images, and make sure to fill in the blanks above with the filenames of the images you will be sending. If you leave an area blank above and email an additional image, it might not be included, it must be indicated in the area you want it placed above.
Custom Graphics
Please watch the video below for information on how to pick graphics and upload them, it will answer most questions and insure you get the best possible custom dust cover available on the market. We want to make the process as easy as possible and make sure your cover turns out just like you want. We have very high standards and your dust cover final product quality is determined by the graphic quality you send us.
Video Tutorial: Choosing Custom Graphics
Ordering Help
We want your dust cover engraving to be a personalized piece of art and to enhance your AR, and a little bit of preparation on your part can help ensure the process goes smoothly and the end result is something you can be proud to display on your rifle. We have prepared a video addressing the common questions on ordering dust covers below. If you have any additional questions please do not hesitate to contact us.
Video Tutorial: How To Order The Perfect Custom Dust Cover
Fitment Details:
The AR-10 is not a Mil-Spec platform and proprietary uppers that use the generic AR10 name may have dust cover sizes that are different than the covers we use. Please check with your upper manufacturer if you are unsure. Detailed sizing specifications are available here: Detailed Fitment Details
Engraved in the USA